6. The Add New Hardware Wizard detects the device driver. Click Next.
7. Follow the instructions on your screen to complete the installation; then restart
your computer if it does not do so automatically.
Installing the software for Windows NT Workstation
Follow these instructions to install the device drivers and utility software for Windows
NT Workstation.
1. After installing the graphics adapter, start up your computer in VGA mode.
During the start up process, Windows NT Workstation will prompt you to choose
between VGA mode and normal mode; select VGA mode.
2. Log in as a user who is able to change system settings.
3. A warning message might appear which says
Invalid display settings...
;
click OK to continue.
4. With the right mouse button, click on the desktop; then click Properties.
5. Click the Settings tab; then click Display Type....
6. The Display Type window opens. In the Adapter Type section, click Change....
7. Locate the installation CD included with this option. Insert the CD into your
CD-ROM or DVD-ROM drive.
8. Click Have Disk...; then click Browse and locate the WinNT40 directory on the
installation CD.
9. Click to select the SR9.INF file; then click Open.
10. Follow the instructions on your screen to complete the installation. When
prompted to do so, restart your computer.
11. When your computer restarts, you will see a warning message which says
Invalid display settings: A new display driver has been installed.
The default resolution is being used by the system
. Click OK and
select a new resolution setting.
12. Test the new resolution setting before accepting it. If your monitor displays a
blank or distorted screen, your monitor does not support the resolution setting you
chose; select a different setting.
Note: If you accidently accept a resolution setting not supported by your
monitor, you must restart your computer in VGA mode and select a
different setting.
Part 1: Installation Guide 1-5