![background image](http://html1.mh-extra.com/html/ibm/san48c-6/san48c-6_installation-service-and-user-manual_3513744053.webp)
Procedure
1. Attach an ESD-preventive wrist strap and follow its instructions for use.
2. Remove the dust cover from the connector on the cable.
3. Remove the dust plug from the cable end of the transceiver.
4. Align the cable connector with the transceiver and insert the connector into the transceiver until it
clicks into place.
Figure 17. Connecting an LC-Type Cable to a Fibre Channel Port
CAUTION: The LC connector has keys to allow insertion only one way into the transceiver. If the
cable does not install easily, ensure that it is correctly oriented before continuing.
For instructions on verifying connectivity, see the Fabric Manager Fundamentals Configuration Guide
and the NX-OS Fundamentals Configuration Guide.
Removing a Cable from an SFP Transceiver
About this task
CAUTION:
• When pulling a cable from a transceiver, grip the body of the connector. Do not pull on the jacket
sleeve because this can compromise the fiber optic termination in the connector.
• If the cable does not remove easily, ensure that any latch present on the cable has been
released before continuing.
To remove the cable, follow these steps:
Procedure
1. Attach an ESD-preventive wrist strap and follow its instructions for use.
2. Press the release latch on the cable, grasp the connector near the connection point, and gently pull the
connector from the transceiver.
3. Insert a dust plug into the cable-end of the transceiver.
4. Install a dust cover over the end of the cable.
Removing and Installing SFP Transceivers
Warning: Removing and installing an SFP transceiver can shorten its useful life. Do not remove and
insert SFP transceivers more often than is absolutely necessary. We recommend that you
disconnect the cables before installing or removing SFP transceivers to prevent damage to the
cable or transceiver.
Chapter 4. Connecting the IBM SAN48C-6 Switch 33