IBM SAN04B-R - System Storage Router, Installation, Service And User Manual, Page: 78 / 103

3. Remove the protective cap from the SFP module, as shown in Figure 21 and
Figure 22. Save the cap for future use.
4. Hold the SFP correctly oriented towards the port as shown in Figure 23 on page
51 and Figure 24 on page 52. For wire bale type SFPs, make sure the bale is
open, in the unlocked position, as shown in
1
of Figure 23 on page 51). Slide
the SFP into the port until you feel it click into place.
Protective
cap
SFP
module
Wire
tab
sf
pw0002
Figure 21. Removing the protective cap from a wire bale type SFP
Protective cap
SFP module
sf
pp0002
Figure 22. Removing the protective cap from a plastic tab type SFP
50
SAN04B-R Installation, Service, and User’s Guide