IBM SAN04B-R - System Storage Router, Installation, Service And User Manual, Page: 31 / 103

Upgrade license features
The following table lists the features for the base model router and the additional
features supported on a router with additional licenses.
Table 3. Capabilities of base model router and router capabilities with upgrade license
Feature
Base model router, without
upgrade license
Router with upgrade
license
Call Home No Yes
Fastwrite over FC port No Yes
Fastwrite over FCIP tunnel Yes Yes
FCIP tunnel over GE port Yes Yes
Fibre Channel port speed 1,
2, or 4 Gbps
1,2, or 4 Gbps 1,2, or 4 Gbps
Fibre Channel routing
between remote fabrics for
fault isolation
Yes Yes
FICON XRC emulation and
tape pipelining over FCIP
No Yes
¹
FIPS 140-2 Level 2 ready Yes ¹ Yes ¹
IPSec No Yes
IP compression Yes Yes
Number of connections or
tunnels (remote sites) per
port
1 8
Maximum committed rate
(throughput throttling) per
FCIP tunnel
Up to 50 Mbps Up to 1 Gbps
Number of Fibre Channel
ports
2 16
Number of Gibabit Ethernet
(GbE) ports
2 2
Redundant power supplies
and fans
Yes Yes
Storage Optimized TCP Yes Yes
Tape pipelining over FCIP
tunnel
No Yes
Tape pipelining over FC port No Yes
¹ Requires FICON Accelerator license.
Note: An upgrade license is required to enable additional ports on the standard
router and to enable additional features listed in Table 3. If you attempt to
enable features or configurations for features beyond those described for the
standard router, an error occurs.
Hardware components
This section describes and illustrates the components accessible on the port side
and the non-port side of the router.
Chapter 1. Introducing the SAN04B-R
3
|
|
|
||
|
|
| |
|
|||
|||
|||
|||
|
| ||
|
|
| ||
|
| ||
|||
|||
|||
|
|
| ||
|
|
| ||
|
| ||
|
| ||
|
| ||
|||
|
| ||
|||
|
|
|
|
|
|