IBM SAN04B-R - System Storage Router, Installation, Service And User Manual, Page: 76 / 103

2. Grasping it by the bale, gently but firmly pull the transceiver out of the port (see
2
in Figure 18).
3. Replace the protective cover on the SFP module.
4. Place the SFP module into a static-protective package.
5. If you will not be replacing the SFP, replace the protective cover on the router
port. If you are replacing the SFP, continue to “Installing an SFP” on page 49.
Removing a plastic tab type SFP: Follow the steps below to remove a plastic
tab type SFP. (If the SFP is a wire bale type, skip these instructions and follow the
instructions in “Removing a wire bale type SFP” on page 47.)
1. Pull the plastic tab outward 10° from the SFP to unlock it (see Figure 19 on
page 49).
OIOI
!
Bale
IOIOI
!
Open Bale
1
2
sp
fw0005
SFP
Figure 18. Unlocking the SFP module latch, wire bale type
48
SAN04B-R Installation, Service, and User’s Guide