IBM SAN Volume Controller 2145-CF8, Hardware Installation Manual

Page: 81 / 101

1
Serial-attached SCSI (SAS) port
When present, this port is disabled in software to make the port inactive. The SAS
port is present when the optional high-speed SAS adapter is installed with one or
more solid-state drives (SSDs).
SAN Volume Controller 2145-CF8 fibre-channel port numbers and
worldwide port names
The physical port numbers are 1 - 4, counting from the left side to the right side
when you view the rear panel of the SAN Volume Controller 2145-CF8.
Figure 47 provides a view of the rear of the SAN Volume Controller 2145-CF8.
2145 UPS-1U controls and indicators
All controls and indicators for the 2145 UPS-1U are located on the front-panel
assembly.
1
Load segment 2 indicator
2
Load segment 1 indicator
3
Alarm or service indicator
4
On-battery indicator
5
Overload indicator
6
Power-on indicator
svc00227cf8b
1
Figure 46. SAN Volume Controller 2145-CF8 port not used
4 3 1 2
svc_00219c_cf8
Figure 47. Physical fibre-channel port numbers for the SAN Volume Controller 2145-CF8
+ -
LOAD 1 LOAD 2
1yyzvm
6
7
8
1 2 3 4 5
Figure 48. 2145 UPS-1U front-panel assembly
Appendix C. SAN Volume Controller hardware controls, indicators, and connectors
55