IBM RS/6000 7025 F50 Series, Service Manual, Page: 328 / 362

Sample File modem_m1.cfg
#
# COMPONENT_NAME: (ESPSETUP) ENTRY SERVICE PROCESSOR SETUP modem_m1
#
# FUNCTIONS: Modem configuration file specifically for IBM 7857-ð17 modem with
#
Auto-Reliable feature. This feature must be turned off for Catcher calls.
# This example uses the AT&F reset command to choose the factory defaults.
#
#
To allow dial commands for digital pagers, it is necessary to reduce
# the number of characters in the dial command. Each comma (delay) has
# been set to 6 seconds (S8=6) for that reason.
#
#
# (C) COPYRIGHT International Business Machines Corp. 1996
# All Rights Reserved
# Licensed Materials - Property of IBM
#
# US Government Users Restricted Rights - Use, duplication or
# disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
#
ICDelay 1
DefaultTO 1ð
CallDelay 12ð
#
# %N Call-Out phone number %R Return phone number
#
#
# PROGRAMMING NOTE: No blanks between double quote marks (").
condout: send "AT&F\EðEð\r" # Reset to factory defaults.
# \Eð=data compression disabled
# Eð=echo disabled
ignore "ð\r" or "OK\r\n" timeout 2 # Ignore modem response.
send "AT#Fð\Q2S8=6\r" # Trellis modulation disabled
# Retrain with adaptive rate
# Set ,=6second
expect "ð\r" or "OK\r\n" timeout 2 # Confirm commands successful
send "ATVðXðSð=ð\r" # Numeric response code
# AT compatible messages
# Auto-Answer disabled
expect "ð\r" or "OK\r\n" timeout 2 # Confirm commands successful.
done
connect: send "ATDT%N\r" # Tone dialing command.
# %N from Call Home setup.
expect "1\r" busy "7\r" timeout 6ð # Expect a connection response.
done
retry: send "A/" # Repeat the previous command.
expect "1\r" busy "7\r" timeout 6ð # Expect a connection response.
D-12
Service Guide