IBM RackSwitch G8000, Installation Manual

Page: 43 / 86

10
11
SEE STEP 5
5. Use the M6 washers, screws, and clip nuts to attach the filler plate to the rear
mounting brackets. Torque the screws to approximately 5.7 Nm +/- 0.1 Nm (50
inch-pounds).
4
2
6
8
6. Use the M3.5 screws to secure the rear brackets to the front brackets. Torque
the screws to approximately 1.1 Nm +/- 0.1 Nm (10 inch-pounds).
9
10 11
3
Chapter 2. Installing the RackSwitch and options
27