IBM Proventia Network Enterprise User Manual Download Page 39

Page: 39 / 268

Registering Enterprise Scanner to Connect to the SiteProtector System

IBM Proventia Network Enterprise Scanner User Guide, Version 1.3

Tip:

You can define additional Agent Managers to use as backups. Arrange them in

order of preference, with the most preferred first in the list.

9. If your agent must use a password to connect with the Agent Manager, click

Enter

Password

, and then type the password in the

Password

and

Confirm Password

boxes.

10. If a proxy HTTPS server is installed on the network between the agent and the

SiteProtector system, select the

Use Proxy Settings

check box, and then configure the

proxy as follows:

11. Click

, and then click

Save Changes

The Authentication page appears.

12. Type the

SiteProtector Account

and

Password

for the SiteProtector Account that

allows you to access sensitive information, such as logon credentials for asset
accounts.

13. Click

Save

After the first heartbeat, your agent appears in the SiteProtector system in the group
you designated.

Note:

This operation may take several minutes. Wait until this page is refreshed in

your browser before you continue.

Field

Description

Proxy Server Address

The DNS name or the IP address of the proxy server.

Proxy Server Port

The HTTPS port number of the proxy server.

Proxy Username

If required, the user ID the agent needs to authenticate with the
proxy server.

Proxy Password

The password that goes with the user ID if the agent needs one to
authenticate with the proxy server.

Summary of Contents for Proventia Network Enterprise













































































































































































































































































Search results

Summary of Contents for Proventia Network Enterprise

Reviews:

Brands by name

Popular brands

IBM Proventia Network Enterprise, User Manual

Search results

Summary of Contents for Proventia Network Enterprise

Reviews:

Brands by name

Popular brands