manualshive.com logo in svg

IBM Proventia Network Enterprise, User Manual

Share
Download
IBM Proventia Network Enterprise User Manual Download Page 110

Chapter 8: Defining Agent Policies

110

IBM Internet Security Systems

Defining Scanning Network Interfaces (ESM Policy)

Introduction

The Enterprise Scanner Module (ESM) policy defines agent-specific scanning preferences 
for the scanning network interfaces on an appliance. An ESM policy applies to only one 
agent. 

Background 
information

Before you customize the subtask and perspective settings in this policy, you should fully 
understand their impact on the scanning process. These concepts are described in detail in 
Chapter 9, "Understanding Scanning Processes in SiteProtector" on page 123.

Subtask sizes for 
agents that share 
perspective

If you assign multiple agents to one perspective, Enterprise Scanner does not require that 
you use the same subtask size for each agent's scanning interface. If you define subtask 
sizes based on scanning window sizes, however, you probably want to use the same 
subtask sizes for those agent's scanning interfaces.

Procedure

To configure a scanning network interface:

1. In the SiteProtector Console, set up a tab to display agent policies. (See page 74.) 

2. On the navigation pane, expand the Enterprise Scanner agent. 

3. Select the ESM policy for the agent on the navigation pane. 

4. Select the row for port 1, and then click the 

Edit selected items detail

 button.

5. Configure the scanning port as follows:

Field

 Description

Port

A read-only field that designates the number of the port.

Port name

A label for the external (scanning) port.

Maximum IPs per 

discovery subtask

a

a. For more information, see “Considerations for Subtask Sizes” on page 111.

The maximum number of IP addresses to discover in a subtask (of a 
task for each scan job). 

Note:

This value applies to all discovery scans that the agent runs.

Maximum assets per 
assessment 

subtask

a

The maximum number of assets to scan in a subtask (of a task for 
each scan job).

Note:

This value applies to all assessment scans that the agent runs.

Perspective (network 
location)

The name of the network location to associate with this scanning port. 

Values:

Global

, the default, and any network locations defined in 

the Network Locations policy

Summary of Contents for Proventia Network Enterprise













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands