manualshive.com logo in svg

IBM Proventia Network Enterprise, User Manual

Share
Download
IBM Proventia Network Enterprise User Manual Download Page 203

Options for Backing up Enterprise Scanner

203

IBM Proventia Network Enterprise Scanner User Guide, Version 1.3

Options for Backing up Enterprise Scanner

Introduction

Use the Backup and Recovery page to create two types of backup files for your Enterprise 
Scanner agent:

If you restore 
before you make 
backup files 

The default system backup for a new agent contains the original installation. Therefore, if 
you restore a system backup or apply settings snapshot files before you create your own 
backup files, you are restoring the agent to its installation defaults. The following 
consequences result: 

●

You lose the configuration settings you have already applied.

●

If you restore from a system backup, you lose any updates you have applied.

Important:

You must reconfigure the appliance starting with running the Proventia 

Setup Assistant. The configuration process is described in Chapter 2, "Installing and 
Configuring an Agent" on page 27.

●

You cannot connect to the Proventia Manager until you reconfigure the appliance.

Important:

Use this option to automatically backup your system before it installs 

updates to avoid having to reconfigure your agent in case of an emergency.

Using automatic 
backup files

Consider using the automatic update option to create a system backup each time the agent 
automatically installs a firmware update. 

Reference:

“Configuring Automatic Downloads and Updates” on page 228.

Clearing the Java 
cache

After you restore the system from a backup file, be sure to do the following before you log 
back on to the Proventia Manager:

1. Close all browser windows.

2. Clear the Java cache. 

Note:

For information about how to clear your Java cache, refer to your operating 

system documentation. In Windows operating systems, it is typically available in the 
Control Panel, under Java. 

Important:

If you do not perform these steps, Proventia Manager may behave 

unpredictably. 

Date of last system 
backup

The System Status information on the Home page includes the date of the last backup in 
the Last System Backup field.

Backup Type

 Description

Settings 

Backs up your agent’s configuration settings. (See page 204.)

Full 

Backs up the operating system 

and

 the configuration settings of 

the agent. (See page 206.)

Table 72:

Types of backups 

Summary of Contents for Proventia Network Enterprise













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands