Removing Internal Drives
8. If you are not reinstalling the same or another drive, install a
metal EMI shield to cover the empty bay:
a. On the right edge of the shield, engage the single tab in the
chassis slot. Make sure that the upper and lower tabs lie
flat against the outside of the chassis.
b. Push in the left side of the shield until the tabs snap into
place.
9. Cover the empty bay with a filler panel and reinstall the filler
panel frame:
a. Use two screws
.1/
to install a filler panel
.2/
in the
corresponding opening in the filler panel frame.
1
2
b. Align the hinge tabs at the right edge of the filler panel
frame with the corresponding slots in the chassis.
c. Swing the panel frame to the left until it latches.
Chapter 3. Installing Options
177
