IBM PC 300PL Types 6862, Using Manual

Page: 44 / 146

2. Place the CD in the tray with the label facing up. If you have placed your
computer in a vertical position using an optional floor stand,
7
extend the four
clips on the tray so that the CD does not slip off the tray when the CD-ROM
drive is operating.
Clip
3. Close the tray by pressing the Eject/Load button, or by gently pushing the tray
forward. When the tray is closed, the indicator light on the front of the drive
will activate to indicate that the drive is in use.
4. To eject the CD, press the Eject/Load button. When the tray slides out,
carefully remove the CD. (If the clips on the tray are extended, retract the clips
before removing the CD.)
5. Close the tray by pressing the Eject/Load button, or by gently pushing the tray
forward.
Note: If the tray does not slide out of the drive when you press the Eject/Load
button, insert the pointed end of a large paper clip into the emergency-eject
hole located above and to the left of (or near) the CD-ROM indicator light.
7 If you place the computer in a vertical position, use a floor stand to prevent damage to the computer
due to overheating. Refer to Installing Options in Your Personal Computer for information on purchasing
and installing a floor stand.
30
Using Your Personal Computer