IBM PC 300GL Types 6275, User Manual

Page: 93 / 176

Completing the Installation
After working with options, you need to install any removed parts, replace
the cover, and reconnect any cables, including power cords and telephone
lines. Also, depending on the option installed, you might need to update
information in the Configuration/Setup Utility Program program.
The following list is a quick reference to these procedures:
Ÿ
“Replacing the Cover and Connecting the Cables”
Ÿ
“Updating the Computer Configuration” on page 81
Replacing the Cover and Connecting the Cables
To replace the cover and connect cables to your computer:
1. Ensure that all components have been reassembled correctly and that
no tools or loose screws are left inside your computer.
2. Clear any cables that might impede the replacement of the cover.
3. Position the cover over the chassis so that the front edge is
approximately one inch away from the front bezel.
Chapter 7. Installing Options
79