IBM PC 300GL Type 6563, User Manual

Page: 74 / 190

4. Select the menu item for the feature you want to set. Use Left Arrow
(
←
) or Right Arrow (
→
) to select either Enabled or Disabled. Press
Enter.
5. Select Startup Sequence for the feature. Use Left Arrow (
←
) or Right
Arrow (
→
) to select either Primary or Automatic. If you select
Automatic , make sure Automatic Power On Startup Sequence in the
Startup Sequence menu is set to Enabled. Otherwise, the system will
use the Primary startup sequence.
6. Press Esc until you return to the Configuration/Setup Utility program
menu.
7. Select Save Settings from the Configuration/Setup Utility program
menu, then press Esc and follow the instructions on the screen.
Quick reference for network-related settings
Some models come with a network adapter or modem. The following
tables provide a quick reference to help you if your computer is connected
to other computers on a network. This information is intended to help you
quickly find specific network settings. You can view the current setting or
select a different setting. When finished, you can either save the settings
and exit the utility program or exit without saving the settings.
The steps in the following table always start at the Configuration/Setup
Utility main menu.
To enable: Select: Comments:
Remote
Administration 1. System Security
2. Remote Administration
3. Enabled Enable Remote
Administration to allow
POST/BIOS updates over
the LAN.
Bypass of
normal boot
and use
network 1. Start options
2. Network boot F12
option
3. Enabled
56
PC 300PL and PC 300GL User Guide