IBM PC 300GL Type 6563, User Manual

Page: 59 / 190

When working with the Configuration/Setup Utility program menu, you
must use the keyboard. See the following table for the keys used to
accomplish various tasks.
Note: Active keys are displayed at the bottom of each screen; not all of the
above keys are active on every menu.
In the Configuration/Setup Utility program menus, the configuration
information you can change is enclosed in brackets like these [ ]. You
cannot change information that is not surrounded by brackets.
Exiting from the Configuration/Setup Utility program
When you finish viewing or changing settings, press Esc until you return to
the Configuration/Setup Utility program menu. Depending on where you
are in the program, you might have to press Esc several times to get back to
the Configuration/Setup Utility menu. If you want to save the changes or
settings, select Save Settings before you exit. Otherwise, your changes will
not be saved.
Keys Function
↑ ↓
Use these arrow keys to move among menu items until
the item you want is highlighted.
← →
Use these arrow keys to display and toggle among choices
for a menu item.
Enter Press this key to select a highlighted menu item.
Esc Press this key to exit from a menu after viewing or
making changes to the settings in the menu.
+
Use this key in some menus to increase the numerical
value of a setting.
−
Use this key (the minus or hyphen key) in some menus to
decrease the numerical value of a setting.
0–9 Use these number keys in some menus to change the
numerical value of a setting.
F1 Press this key for help on a selected menu item.
F9 Press this key if you changed and saved the setting of a
selected menu item and you want to restore the setting
that was active before you made the change.
F10 Press this key to return the setting of a selected menu item
to a default value.
Chapter 4. Configuration/Setup Utility program
41