IBM PC 300GL Type 6563, User Manual

Page: 69 / 190

Ÿ
Security Profile by Device. For more information, see “Using Security
Profile by Device” on page 47.
Setting Remote Administration
You can remotely update the system programs, such as POST and BIOS,
from a network server when remote administration is enabled. If you have
set an administrator password for your computer, the password does not
have to be entered in order to remotely update programs. Consult your
network administrator for information on setting up your network server to
perform POST and BIOS updates.
To set Remote Administration, follow these steps:
1. Start the Configuration/Setup Utility program. See “Starting and using
the Configuration/Setup Utility program” on page 39.
2. Select System Security and press Enter.
3. Select Remote Administration and press Enter.
4. To enable update Remote Administration, select Enabled. To disable,
select Disabled. Press Enter.
5. Press Esc until you return to the Configuration/Setup Utility program
main menu.
6. Select Save Settings from the Configuration/Setup Utility program
menu, then press Esc and follow the instructions on the screen.
Chapter 4. Configuration/Setup Utility program
51