Chapter 7. Completing the Installation
After working with options, you need to install any removed parts, replace the
cover, reconnect any cables, including power cords and telephone lines. In addition,
depending on the option installed, you might need to update information in the
Configuration/Setup Utility program.
The following list is a quick reference to the completion procedures:
“Using the Stabilizing Feet”
“Replacing the Cover and Connecting the Cables”
“Updating the Computer Configuration” on page 68
Using the Stabilizing Feet
The four feet attached to the bottom cover rotate 90 degrees to provide additional
stability for your computer.
When you are finished installing the option(s), turn the four stabilizing feet a
quarter turn out from the computer and set it carefully back on its feet.
Replacing the Cover and Connecting the Cables
Before you begin
Read “Electrical Safety” on page 3 and “Handling Static-Sensitive Devices”
on page 4.
If you set the computer in an upright position, ensure that the stabilizer feet
are positioned correctly. See “Using the Stabilizing Feet.”
1
Ensure that all components have been reassembled correctly and that no tools
or loose screws are left inside your computer.
66
Copyright IBM Corp. 1999
Summary of Contents for PC 300GL Type 6285
Page 2: ......
Page 96: ...IBM Part Number 06J0846 Printed in U S A April 1999 ð6Jð846 ...
