Note:
Removing an adapter frees up system resources. If you remove an ISA
legacy adapter, you must use the Configuration/Setup Utility program
to set the previously used resources to [Available]. For more
information, see Chapter 7, “Completing the Installation” on page 66.
What to do next
Go to the device-record form in Using Your Personal Computer, and delete the
name of the adapter you removed.
If you removed the bottom cover, the fan, or the system board, replace them.
See “Moving the Fan” on page 36, “Moving the System Board” on page 34,
and “Opening the Bottom Cover” on page 32.
To work with another option, go to the appropriate section.
To complete the installation, go to Chapter 7, “Completing the Installation”
on page 66.
Installing an AGP Adapter
Not all PC 300PL and PC 300GL models have an AGP connector on the system
board. Therefore, the following instructions are for some computers only.
30
Installing Options in Your Personal Computer
Summary of Contents for PC 300GL Type 6285
Page 2: ......
Page 96: ...IBM Part Number 06J0846 Printed in U S A April 1999 ð6Jð846 ...