IBM Nways 8260, Installation Manual

Page: 31 / 50

7
Attach the faceplate bracket to the motherboard using the two screws (
.6/
in Figure 13) from the dummy bracket.
6
Figure 13. Attaching the Faceplate Bracket
8
Hold the motherboard so that the connectors and screw holes are aligned
correctly on the module. Then gently push the card downwards until you
hear it click into the motherboard connectors.
9
Reattach the motherboard to the module using the four screws (
.7/
and
.8/
in Figure 14 on page 22) that originally held the motherboard.
Chapter 4. Installing an E3, DS3, OC3, or STM1 I/O Card
21