IBM Nways 8260, Installation Manual

Page: 21 / 50

3
Disconnect the motherboard connectors and lift the motherboard out of the
module.
4
Remove the dummy faceplate bracket from the motherboard (
.3/
in
Figure 5), saving the screws for the new bracket. Save the dummy
bracket in a safe place for future reuse.
3
Figure 5. Removing the Dummy Faceplate Bracket
5
Attach the I/O card to the motherboard using the four screws provided (
.4/
in Figure 6).
4
5
Figure 6. Attaching the I/O Card
Chapter 3. Installing an E1/T1/J1 or E1/T1/J1 IMA I/O Card
11