IBM Nways 8260, Installation Manual

Page: 13 / 50

Chapter 2. Unpacking and Checking the Shipping Group
This chapter describes the contents of the I/O card shipping groups, and describes how
to unpack the I/O cards.
Shipping Group Contents
E1/T1/J1 I/O Card or E1/T1/J1 IMA I/O Card
When you receive your I/O card, the shipping group for each card contains:
Ÿ
One I/O card, to be installed on the motherboard
Ÿ
One Vital Product Data (VPD) Programmable Read Only Memory (PROM) chip, to
be installed on the motherboard
Ÿ
Six screws to secure the I/O card to the motherboard
Ÿ
Two screwlock kits, one for each port
Ÿ
One faceplate
Ÿ
Two
'
Y
'
cables for connecting up to 4 ports per I/O card. For the 8265, there are
two sets of
'
Y
'
cables, one set for twisted pair connections and one set for coaxial
connections.
E3, DS3, OC3, and STM1 I/O Cards
When you receive your I/O card, the shipping group for each card contains:
Ÿ
One I/O card, to be installed on the motherboard
Ÿ
One Vital Product Data (VPD) Programmable Read Only Memory (PROM) chip, to
be installed on the motherboard.
Ÿ
Five screws: three for attaching the I/O card to the motherboard, and two for
securing the I/O card to the front panel of the module.
Ÿ
One motherboard faceplate bracket.
Ÿ
One dummy port cover with screw, for use when only one I/O card is installed on a
motherboard.

Copyright IBM Corp. 1996, 1998
3