![background image](http://html1.mh-extra.com/html/ibm/netvista-kiosk-dbcs/netvista-kiosk-dbcs_hardware-service-manual_609179013.webp)
5. Press the Select button to feed out the paper and to place the printer in the
online state.
Select button
Thumbscrew
Cover
Presenter
Upper guide
Platen
Note:
At autoloading, the paper is not automatically fed into the printer under the
following conditions:
1. When the platen is open. Be sure to close the platen.
2. When the upper guide on the presenter is open. Be sure to close the
upper guide.
3. When paper is left in the presenter. Press the Feed button to remove the
paper. Or, loosen the thumbscrew, open the cover, and remove the
paper.
4. When a paper-out error is disabled by a command. Reset the paper.
Attention:
Observe the following points at autoloading:
1. Cut the edge of the paper so that its angle to the feed direction is between 60°
and 90° as shown:
(Front of paper)
90
60
(Front of paper)
2. When inserting paper, make sure that the platen and the upper guide on the
presenter are closed (is a presenter is attached).
3. If the paper is skewed, set the paper straight with the platen open.
4. If the printer unit is left with the platen closed, the thermal print head may stick
to the platen, preventing paper to be inserted. Then, open the platen before
inserting the paper.
The NetVista Kiosk-DBCS Model
7
Summary of Contents for NetVista Kiosk DBCS
Page 2: ......
Page 6: ...iv ...
Page 37: ...The NetVista Kiosk DBCS Model 31 ...
Page 38: ... Part Number 57P4240 Printed in Japan GY18 2417 00 1P P N 57P4240 ...