Installing the paper roll
Attention:
1. Establish personal grounding before touching this device. For more information,
see
″
Electrostatic discharge (ESD)
″
on page 158 of the Hardware Service
Manual
.
2. Keep your fingers clear of the paper cutter while pressing the paper advance
button or when powering on.
3. Install the paper roll after you verify that your system is powered-on. See
“Powering off the NetVista Kiosk” on page 4 for more information.
4. Do not use grade of paper other than that specified for this product. Using an
inferior grade paper can affect the print quality and the life of the print head and
printer mechanism. The NetVista Kiosk supports the 58-mm, the 80-mm, or the
112-mm thermal printer.
To install the paper roll, do the following:
1. Set the winding direction of the paper roll so that the temperature-sensitive side
faces up.
2. Align the core of the paper roll with the movable shaft and insert the paper roll
all the way into the shaft. After the insertion make sure that:
v
the extremity of the movable shaft is visible
v
the paper roll is not misaligned with its core
v
the paper roll rotates smoothly
Figure 1. Printer caution label
The NetVista Kiosk-DBCS Model
5
Summary of Contents for NetVista Kiosk DBCS
Page 2: ......
Page 6: ...iv ...
Page 37: ...The NetVista Kiosk DBCS Model 31 ...
Page 38: ... Part Number 57P4240 Printed in Japan GY18 2417 00 1P P N 57P4240 ...