![background image](http://html1.mh-extra.com/html/ibm/netvista-kiosk-dbcs/netvista-kiosk-dbcs_hardware-service-manual_609179010.webp)
Powering off the NetVista Kiosk
Use the following power-off sequence to ensure that the NetVista Kiosk components
are powered-off.
1. Switch off the power to the 4835 system by pressing the power button with a
paper clip. The power button is located on the front bottom of the 4835 display.
The display indication lights
A
will not be lit.
2. Unplug the power cord
B
that runs from the NetVista Kiosk enclosure to the
external ac power source.
3. Unlock the enclosure and slide the front of the enclosure forward. See
″
Opening
the enclosure
″
on page 9 of the Hardware Service Manual.
4. Turn off the power switch
C
on the optional UPS (if installed).
5. Switch off the power-distribution strip
D
.
6. Make sure that the scanner is powered off by holding a white sheet of paper at
location
E
. No red light pattern will be displayed.
A
E
B
C
D
4
Summary of Contents for NetVista Kiosk DBCS
Page 2: ......
Page 6: ...iv ...
Page 37: ...The NetVista Kiosk DBCS Model 31 ...
Page 38: ... Part Number 57P4240 Printed in Japan GY18 2417 00 1P P N 57P4240 ...