Chapter 1. General Checkout
This general checkout procedure is for type 2251/6830/6831 computers.
Attention:
The drives in the computer you are servicing might have been rearranged or the drive
startup sequence changed. Be extremely careful during write operations such as copying,
saving or formatting. Data or programs can be overwritten if you select an incorrect drive.
Diagnostic error messages appear when a test program finds a problem with a
hardware option. For the test programs to properly determine if a test
Passed
,
Failed
or
Aborted
, the test programs check the error-return code at test completion. See
“Diagnostics” on page 10.
General error messages appear if a problem or conflict is found by an application
program, the operating system, or both. For an explanation of these messages, refer
to the information supplied with that software package.
Notes:
v
Type 2251/6830/6831 computers default to come up quiet (no beep and no memory
count and checkpoint code display) when no errors are detected by POST.
v
To enable beep and memory count and checkpoint code display when a successful POST
occurs, do the following:
1.
Select
Start Options
in the Configuration/Setup Utility program (see “Setup Utility
program” on page 8).
2.
Set
Power-On Self-Test
to
Enhanced
.
v
Before replacing any FRUs, ensure that the latest level of BIOS is installed on the system.
A down-level BIOS might cause false errors and unnecessary replacement of the system
board. For more information on how to determine and obtain the latest level BIOS, see
“BIOS levels” on page 97.
v
If multiple error codes are displayed, diagnose the first error code displayed.
v
If the computer hangs with a POST error, go to
″
Symptom-to-FRU Index
″
on page 39.
v
If the computer hangs and no error is displayed, go to “Undetermined problems” on
page 79.
v
If an installed device is not recognized by diagnostics, that device might be defective.
001
1.
Power-off the computer and all external devices.
2.
Check all cables and power cords.
3.
Make sure the system board is seated properly.
4.
Set all display controls to the middle position.
5.
Power-on all external devices.
6.
Power-on the computer.
7.
Check for the following response:
v
Readable instructions or the Main Menu.
DID YOU RECEIVE THE CORRECT RESPONSE?
© Copyright IBM Corp. 2000
1
Summary of Contents for NETVISTA 2251
