IBM NETVISTA 2251, Hardware Maintenance Manual

Page: 70 / 152

No-beep symptoms
Important:
Type 2271/6840/6841 computers default to come up quiet (no beep and no memory count
and checkpoint code display) when no errors are detected by POST.
To enable beep and memory count and checkpoint code display when a successful POST
occurs, do the following:
1. Select Start Options in the Configuration/Setup Utility program (see “Setup Utility
program” on page 8).
2. Set Power-On Self-Test to Enhanced .
Symptom/Error FRU/Action
No beep during POST but computer works
correctly.
1. System Board
No beep during POST.
1. See “Undetermined problems” on page
79.
2.
System Board
3. Memory Module
4. Any Adapter or Device
5. Riser Card
6. Power Cord
7. Power Supply
62
Hardware Maintenance Manual