IBM NETVISTA 2251, Hardware Maintenance Manual

Page: 87 / 152

Message/Symptom FRU/Action
Some or all keys on the keyboard do not
work
1. Keyboard
2. Keyboard Cable
3.
System Board
Undetermined problems
Check the power supply voltages (see “Power supply” on page 35). If the voltages
are correct, return here and continue with the following steps.
1. Power-off the computer.
2.
Remove or disconnect the following components (if installed) one at a time.
a. Non-IBM devices
b.
External devices (modem, printer, or mouse)
c. Any adapters
d. Riser card
e. Memory modules
Before removing or replacing memory modules, see “System board
memory” on page 32.
f. Extended video memory
g.
External Cache
h. External Cache RAM
i.
Hard disk drive
j. Diskette drive
3.
Power-on the computer to re-test the system.
4. Repeat steps 1 through 3 until you find the failing device or adapter.
If all devices and adapters have been removed, and the problem continues, replace
the system board (see “Replacing a system board” on page 34).
Chapter 6. Symptom-to-FRU Index
79