IBM Netfinity 4500R Hardware Maintenance Manual Download

Page: 18 / 192

Hardware Maintenance Manual: Netfinity 4500R Type 8656

Ethernet Transmit/Receive Activity Light:

When this green light is on, there is

transmit or receive activity to or from the server.

Information Light:

This amber light is on when the information log contains

information about certain conditions in your server that might affect performance. For
example, the light will be on if your server does not have redundant power. A light on
the diagnostic LED panel on the system board will also be on.

System Error Light:

This amber light is lit when a system error occurs. An LED on the

diagnostic LED panel will also be on to further isolate the error.

Summary of Contents for Netfinity 4500R

































































































































































































Search results

Summary of Contents for Netfinity 4500R

Reviews:

Related manuals for Netfinity 4500R

Brands by name

Popular brands

IBM Netfinity 4500R, Hardware Maintenance Manual

Search results

Summary of Contents for Netfinity 4500R

Reviews:

Related manuals for Netfinity 4500R

Brands by name

Popular brands