IBM N51 Series Hardware Maintenance Manual Download Page 74

Page: 74 / 503

Undetermined Problem

You are here because the diagnostics tests did not identify
the failing FRU.

1. Power-off the computer and remove the battery packs

from the computer.

2. Remove or disconnect one of the following devices or

adapter (do not isolate FRUs that are known to be
good).
a. Non-IBM devices

b. Modem, printer, mouse, or other external device

c. IC DRAM card

d. Hard disk drive (fixed disk drive) or diskette drive
e. Any adapter and device.

3. Power-on the computer and start the system program.
4. If the symptom remains, repeat steps 2 and 3 until

you find the failing FRU or until all FRUs have been
removed.

5. If all of the FRUs listed have been removed and the

problem remains, replace the system board.

IBM Mobile Systems HMM - Volume 1

Summary of Contents for N51 Series
























































































































































































































































































































































































































































































































Search results

Summary of Contents for N51 Series

Reviews:

Related manuals for N51 Series

Brands by name

Popular brands

IBM N51 Series, Hardware Maintenance Manual

Search results

Summary of Contents for N51 Series

Reviews:

Related manuals for N51 Series

Brands by name

Popular brands