IBM N51 Series, Hardware Maintenance Manual

Page: 407 / 503

014 (continued)
IS THE CONFIGURATION THE SAME AS THE
INSTALLED DEVICES?
Yes No
015
– Go to “Checking the Installed Devices” on
page 397.
016
– Select Start and press Enter.
Diagnostic tests will run on all available devices.
If the test finds a device error, the error is displayed with
an X beside the device name.
For example:
DID THE TESTS FIND A DEVICE ERROR?
Yes No
017
The error was not detected by the basic test. Go to
Step 019.
018
– Note the error codes and go to “FRU Codes” on
page 419 and replace the appropriate FRUs.
019
– Go to the advanced diagnostic screen by pressing
Ctrl
+
A, and run the following tests.
Ÿ
Diskette drive test (use a blank diskette).
Ÿ
Serial port test (with the wrap plug).
Note: Install the wrap plug on the serial port of
Dock II.
Ÿ
Parallel port test (with the wrap plug).
Note: Install the wrap plug on the parallel port of
Dock II.
Ÿ
PCMCIA-2 test (with the PC test card).
Note: Install the PC Test Cards into the PCMCIA
slot of Dock II.
(Step 019 continues)
S y s t e m B o a r d
02
FRU 0010
DEV 001
ERR
DEV: Device ID
ERR: Error Description Code
FRU: FRU Code
Note: If the test stops or hangs during
the test, replace the last device
that was tested.
Dock II (3546)
395