M768MR Mainboard User’s Manual
Power Management Setup Page
This page sets some of the parameters for the system power
management operation.
AMIBIOS SETUP – POWER MANAGEMENT SETUP
©1998 American Megatrends, Inc. All Rights Reserved
Power Management/APM Disabled RTC Alarm Minute 30
Green Monitor Power State Suspend RTC Alarm Second 30
Video Power Down Mode Stand By
Hard Disk Power Down Mode Suspend
Standby Time Out (Minute) Disabled
Suspend Time Out (Minute) Disabled
Display Activity Ignore
Serial port 1 Monitor
Serial port 2 Monitor
Parallel port Ignore
Floppy disk Monitor
Primary master IDE Monitor
Primary slave IDE Ignore
Secondary master IDE Monitor
Secondary slave IDE Ignore
RTC Alarm Power On Disabled ESC : Quit
: Select Item
LAN Resume From Soft Off Disabled F1 : Help PU/PD/+/- : Modify
RTC Alarm Power On Disabled F5 : Old Values (Shift)F2 : Color
RTC Alarm Date 15 F6 : Load Optimal values
RTC Alarm Hour 12 F7 : Load Best performance values
Power
Management/APM
Use this item to enable or disable the power
management routines. If you enable the power
management, you can use the items below to
set the power management operation.
Green Monitor
Power State
This item defines which power-saving mode is
required to trigger the power management
operations of a green monitor.
Video Power Down
Mode
This item defines which power-saving mode is
required to power down the monitor.
Hard Disk Power
Down Mode
This item defines which power-saving mode is
required to power down the hard disk drive.
Standby Time Out
(Minute)
This sets the timeout for standby mode in
minutes. If the time selected passes without any
system activity, the computer will enter the
power-saving standby mode.
Suspend Time Out
(Minute)
This sets the timeout for suspend mode in
minutes. If the time selected passes without any
system activity, the computer will enter the
power-saving suspend mode.
28
