3: BIOS Setup Utility
Display Activity
If you set this item to Monitor, any activity on
the display will reset the timers for the power-
saving timeouts.
Serial Port 1
If you set this item to Monitor, any activity on
the serial port 1 will reset the timers for the
power-saving timeouts.
Serial Port 2
If you set this item to Monitor, any activity on
the serial port 2 will reset the timers for the
power-saving timeouts.
Parallel port
If you set this item to Monitor, any activity on
the parallel port will reset the timers for the
power-saving timeouts.
Primary master/
slave IDE
If you set these items to Monitor, any activity on
devices on the primary IDE channel will reset
the timers for the power-saving timeouts.
Secondary master/
slave IDE
If you set these items to Monitor, any activity on
devices on the primary IDE channel will reset
the timers for the power-saving timeouts.
Ring Resume
From Soft Off
If you enable this item, incoming calls to the fax/
modem can resume the system from a power-
saving mode or a software power down.
LAN Resume From
Soft Off
If you enable this item, network traffic to the
LAN adapter can resume the system from a
power-saving mode or a software power down.
RTC Alarm Power
On
If you enable this item you can set an alarm on
the system realtime clock that will resume the
system from a power-saving mode or a
software power down.
RTC Alarm Date /
Hour / Minute /
Second
If you have enabled the RTC Alarm Power on,
use these items to set the time and date of the
alarm.
29
