IBM M768MR User Manual Download Page 28

Page: 28 / 47

M768MR Mainboard User’s Manual

Advanced CMOS Setup Page

Use this page to set more advanced information about your system.
Take some care with this page. Making changes can affect the
operation of your computer.

Quick Boot

If you enable this item, the system starts up more
quickly be elimination some of the power on test
routines.

Boot Device

Use these three items to determine the order and
priority that your computer follows to load an
operating system at start-up time.

Try Other Boot
Device

If you enable this item, the system will also
search for other boot devices if it fails to find an
operating system from the first three locations.

S.M.A.R.T.
Capability

Enable this item if your hard disk(s) supports
SMART (Self-Monitoring, Analysis and Reporting
Technology).

BootUp Num-
Lock

This item determines if the Num Lock key is
active or inactive at system start-up time.

Floppy Drive
Swap

If you have two diskette drives installed and you
enable this item, drive A becomes drive B and
drive B becomes drive A.

Summary of Contents for M768MR
















































Search results

Summary of Contents for M768MR

Reviews:

Related manuals for M768MR

Brands by name

Popular brands

IBM M768MR, User Manual

Search results

Summary of Contents for M768MR

Reviews:

Related manuals for M768MR

Brands by name

Popular brands