IBM ISERIES SC41-5210-04, User Manual

Page: 144 / 294

Specify Edit Word
Field . . . . . : Heading 1 . . . . :
Length . . . . : Heading 2 . . . . :
Decimal . . . . : Heading 3 . . . . :
Type information, press Enter. (Put quotes around edit words.)
(Each blank replaced by a digit, each ’&’ with a blank.)
Edit word . . . . . ’ , , 0. -’
(These are SAMPLES only; they are not defaults.)
Edit word for
summary total . . ’ , , , 0. -’
F3=Exit F5=Report F10=Process/previous F12=Cancel
F13=Layout F16=Remove edit F18=Files
For example, if you want to define an edit word containing an eleven-digit field with no decimal positions,
and you want commas for thousands separators and
CR
for negative values, your edit word would be
’ ,
, , &CR’
and a value in the report would appear as
27,345,838,789 CR
if it were a negative value.
You might define
’0( )& - ’
as the edit word for a ten-digit telephone number that has been
formatted for ten or eleven digits on the Specify Report Column Formatting display.
The ten digit number
5079876543
would be displayed as
(507) 987-6543
.
The edit word might be
’ - - ’
for a nine-digit social security number, such as
’123-45-6789’
.
Consider the following as you define your edit words. Each edit word is marked with the CCSID of the job
used to define it so that it can be converted for use in a job with a different CCSID. Refer to “CCSID and
column formatting and editing in Query for iSeries” on page 253 for information about how CCSIDs affect
edit words.
v
If option 1 (Total) was or will be specified on the Select Report Summary Functions display to get
summary totals for the field, the J edit code is used to edit the field if you do not define an edit word in
the
Edit word for summary total prompt.
v
The edit word for summary function totals, if used, must have three more blank positions than the field
length indicates, but its length cannot exceed 31 digit positions. The editing positions containing
commas for thousands separators or a period for the decimal point, for example, are in addition to the
31 maximum.
v
When an edit word is used, its length is considered by Query in determining the column width used in
the report for that field. If the summary total edit word is defined, but no summary total is defined for this
field, for example, then the length of the summary total edit word is ignored in determining the column
width for detailed output.
v
If both edit words are defined and used, both are assumed to be aligned on the right with the last
character in each string. If they are not aligned, the ampersand (&) can be used to add blanks to one of
the edit word character strings so that they are aligned.
v
If the widest edit word to be used is narrower than the column headings, the column headings are
centered over it. Otherwise, the farthest right position of the column headings is aligned with the farthest
right position of the edit word.
v
If you want a single apostrophe to appear in the edited result, use two single apostrophes (
’
) in the edit
word.
132
Query for iSeries Use V5R2