IBM IntelliStation 6866, Hardware Maintenance Manual, Page: 63 / 148

Symptom-to-FRU index
55
014-2XX-XXX
014-3XX-XXX
Parallel port failure
1. External parallel device
2. System board
015-000-XXX USB port Interface Test Passed 1. No action
015-001-XXX USB port Presence 1. Remove USB device(s) and re-test
2. System board
015-002-XXX USB port Timeout 1. Remove USB device(s) and re-test
2. System board
015-015-XXX USB port External Loopback failure 1. Remove USB device(s) and re-test
2. System board
015-027-XXX USB port Configuration/Setup error 1. Flash the system
2. System board
015-032-XXX USB port Device Controller failure 1. System board
015-034-XXX USB port buffer allocation failure 1. Reboot the system
2. Flash the system
3. Run memory test
4. System board
015-035-XXX USB port Reset condition detected 1. Remove USB device(s) and re-test
2. System board
015-036-XXX USB port Register error 1. System board
015-040-XXX USB port IRQ failure 1. Run setup and check for conflicts
2. Flash the system
3. System board
015-195-XXX USB port Test aborted by user 1. Information
2. Re-start the test, if necessary
015-196-XXX USB port test halt, error threshold exceeded 1. Press F3 to review the log file
2. Re-start the test to reset the log file
015-197-XXX USB port test warning 1. Make sure the component that is called out is
connected and/or enabled
2. Re-run test
3. Component that is called out in warning statement
4. Component under test
015-198-XXX USB port test aborted 1. If a component is called out, make sure it is
connected and/or enabled
2. Flash the system and re-test
3. Go to the "Undetermined problems" section
015-199-XXX USB port test failed, cause unknown 1. Go to the "Undetermined problems" section
2. Flash the system and re-test
3. Replace component under function test
018-000-XXX PCI Card Test Passed 1. No action
Diagnostic Error Code FRU/Action