IBM IntelliStation 6866, Hardware Maintenance Manual, Page: 43 / 148

FRU replacements
35
If the voltages are not correct, and the power cord is good, replace the power supply.
Rack mount configuration
To configure the Type 6866 in a rack mount there are three major steps:
1. Preparing the computer for installation in a rack enclosure.
2. Preparing the rack enclosure.
3. Installing the computer into the rack enclosure.
Preparing the computer for installation
Parts needed:
• Part number 10L7006, Netfinity Tower-Rack Conversion Kit
• Two 3.5 mm flange nuts which are provided in a plastic bag taped inside the CD-
ROM drive cover
• The inner slide from two slide bracket assemblies
• 6 pan-head short screws
Attention: To avoid damage to internal components, use only the pan-head short
screws included with the rack mount kit.
Pin Signal Function
1 3.3 V +3.3 V dc
2 3.3 V +3.3 V dc
3 COM Ground
4 5 V +5 V dc
5 COM Ground
6 5 V +5 V dc
7 COM Ground
8 POK Power Good
9 5VSB Standby voltage
10 12 V +12 V dc
11 3.3 V +3.3 V dc
12 - 12 V - 12 V dc
13 COM Ground
14 PS-ON DC Remote Enable
15 COM Ground
16 COM Ground
17 COM Ground
18 - 5 V - 5 V dc
19 5 V +5 V dc
20 5 V +5 V dc