IBM IntelliStation 6866, Hardware Maintenance Manual, Page: 61 / 148

Symptom-to-FRU index
53
006-196-XXX Diskette interface test halt, error threshold
exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
006-197-XXX Diskette interface test warning 1. If a component is called out, make sure it is
connected and/or enabled
2. Re-run test
3. Component that is called out in warning statement
4. Component under test
006-198-XXX Diskette interface test aborted 1. If a component is called out, make sure it is
connected and/or enabled
2. Flash the system and re-test
3. Go to the "Undetermined problems" section
006-199-XXX Diskette interface test failed, cause unknown 1. Go to the "Undetermined problems" section
2. Flash the system and re-test
3. Replace component under function test
006-25X-XXX Diskette interface Error 1. Diskette drive cable
2. Diskette drive
3. System board
011-000-XXX Serial port Interface Test Passed 1. No action
011-001-XXX Serial port Presence 1. Remove external serial device, if present
2. Run setup, enable port
3. System board
011-002-XXX
011-003-XXX
Serial port Timeout/Parity error
1. System board
011-013-XXX
011-014-XXX
Serial port Control Signal/Loopback test
failure
1. System board
011-015-XXX Serial port External Loopback failure 1. Wrap plug
2. System board
011-027-XXX Serial port Configuration/Setup error 1. Run Setup, enable port
2. Flash the system
3. System board
011-03X-XXX
011-04X-XXX
Serial port failure
1. System board
011-195-XXX Serial port Test aborted by user 1. Information
2. Re-start the test, if necessary
011-196-XXX Serial port test halt, error threshold exceeded 1. Press F3 to review the log file
2. Re-start the test to reset the log file
011-197-XXX Serial port test warning 1. Make sure the component that is called out is
connected and/or enabled
2. Re-run test
3. Component that is called out in warning statement
4. Component under test
Diagnostic Error Code FRU/Action