61
o
Type the following command and press enter, where
x
is the slot number
of the Power blade:
env –T blade[
x
].
o
Type
console
and press enter to assign the VIOS console.
•
Power on or restart the Power blade. This can be done in a number of ways,
including using the white power button on the front of the blade or using the power on
or restart option from the AMM web browser interface.
•
Once the Partition Firmware displays its initial screen, press
1
to enter the SMS
menu. If you miss the prompt to press 1, the partition will attempt to boot from the
default device, which may boot back into VIOS, if there is still a bootable image
installed on the default device (probably the internal hard drive). Otherwise, the boot
will fail and the SMS menu will eventually be displayed.
•
On the SMS
Main Menu
, type
5
and press enter to
Select Boot Options
.
•
On
the
Multiboot
menu, type
1
and press enter to
Select Install/Boot Device
.
