IBM HS22V BLADECENTER - X5670 FOR SPEC CPU2006 Page 49 Specification Download | Manualshive

Page: 49 / 80

background image

49

•

In IVM, identify two additional disk units from different DSMs, as described in section
5.13.3

•

On the same

Physical Volumes

screen in IVM, place a checkmark next to them and

click

Modify partition assignment

•

Select the correct IBM i LPAR in the drop-down menu and click

OK

•

In IBM i, add the two new disk units to the mirrored System ASP, as described earlier
in this section

5.14. Install IBM i PTFs (if necessary)

Use the “Fixes concepts and terms” topic in the IBM i Information Center for the steps to install
any required PTFs:
http://publib.boulder.ibm.com/infocenter/systems/scope/i5os/index.jsp?topic=/rzam8/rzam8fixcon
cepts1.htm.

Use the IBM i Recommended Fixes Web site to get a list of the latest recommended PTFs:
http://www-912.ibm.com/s_dir/slkbase.nsf/recommendedfixes.

6. Post-install tasks and considerations

6.1. Configure IBM i networking

Refer to the Ethernet topic in the IBM i Information Center to configure IBM i networking for
production:
http://publib.boulder.ibm.com/infocenter/systems/scope/i5os/topic/rzajy/rzajyoverview.htm. Keep
in mind that while any Virtual Ethernet adapter available in IBM i (as a CMNxx device) can be
configured, only those on VLANs bridged with a Virtual Ethernet bridge can communicate with the
external LAN.

6.2. Configure Electronic Customer Support (ECS) over LAN

There is no physical modem available to IBM i on Power blade, so ECS over LAN should be
configured. Consult the topic “Setting up a connection to IBM” in the IBM i Information Center:
http://publib.boulder.ibm.com/infocenter/systems/scope/i5os/topic/rzaji/rzaji_setup.htm.

6.3. How to perform IBM i operator panel functions

•

In IVM, click

View/Modify Partitions

•

Select the IBM i partition

•

Use

the

More Tasks

drop-down menu and select

Operator panel service functions

•

Select the function you wish to perform and click

OK

6.4. How to display the IBM i partition System Reference Code (SRC) history

•

In IVM, click

View/Modify Partitions

•

Select the IBM i partition

•

Use

the

More Tasks

drop-down menu and select

Reference Codes

•

Click an SRC to display all words.

«
...
47
48
49
50
51
...
»

Summary of Contents for HS22V BLADECENTER - X5670 FOR SPEC CPU2006

















































































Reviews:

No comments

Related manuals for HS22V BLADECENTER - X5670 FOR SPEC CPU2006

Brand: TANDBERG Pages: 66

Content Server None

Brand: TANDBERG Pages: 14

Brand: AMX Pages: 212

JUNOS PUS MOBILE SECURITY SUITE

Brand: Juniper Pages: 6

FLEX-CREATING ADVANCED COMPONENTS

Brand: MACROMEDIA Pages: 24

FLEX - DEVELOPING COMPONENTS AND THEMES

Brand: MACROMEDIA Pages: 82

ENTERPRISE SOLUTION ERASING FI

Brand: Blackberry Pages: 10

CERTIFICATE SYSTEM 8.0 - ADMINISTRATION

Brand: Red Hat Pages: 564

ANTI-VIRUS 2011 - REV 2011.07

Brand: AVG Pages: 210

ANTI-VIRUS 2011 - REV 2011.06

Brand: AVG Pages: 210

Brand: SkyLink Pages: 6

Brand: F-SECURE Pages: 219

NAVIGATOR 380 -

Brand: Genius Pages: 26

Brand: QMS Pages: 50

DREAMWEAVER 8-DREAMWEAVER API

Brand: MACROMEDIA Pages: 628

Image Acquisition Software

Brand: National Instruments Pages: 68

DEEP FREEZE ENTERPRISE

Brand: FARONICS Pages: 104

SSD ULTRA320 SCSI 3.5" DC-000255

Brand: SanDisk Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands