19
•
Choose
BladeCenter
under
Choose support type
and click the right arrow
•
Select
BladeCenter S
under
Product family
and click
Go.
This applies even if you are
using one or both SAS I/O modules in a BladeCenter H
•
If using the standard SAS I/O module, find the link to the most recent
SAS Connectivity
Module firmware
and click it
o
Download the .ZIP file containing the firmware update and the corresponding
README file
•
If using the SAS RAID I/O module, find the link to the most recent
SAS RAID Controller
Module Matrix
and click it
o
Click
the
Storage Configuration Manager (SCM) Firmware Update Package
link
o
Download the .ZIP and README files
o
Go back to the
SAS RAID Controller Module Matrix
page and also download
the latest version of the
Storage Configuration Manager
software; you will
employ it later to configure RAID arrays and volumes
3.8. Download the BladeCenter S DSM firmware
•
Start at http://www.ibm.com/support
•
Choose
BladeCenter
under
Choose support type
and click the right arrow
•
Select
BladeCenter S
under
Product family
and click
Go
•
Find the link to the most recent
Disk Storage Module (DSM) Firmware
and click it
•
Download the .ZIP file containing the firmware update and the corresponding
README file
3.9. Update the BladeCenter management module firmware
•
You can begin this procedure from any AMM Web browser window
•
Click
Firmware Update
under
MM Control
on the navigation pane on the left
•
On
the
Update MM Firmware
window, select
Browse
and navigate to the location
(usually on a local PC) where you downloaded the management module firmware update.
The file or files will have an extension of .PKT
•
Begin with the update file for the
functional AMM firmware release
. Highlight the file
and click the Open button
•
The README text may specify a particular order to select these files. If so, follow the
README file instructions
•
The full path of the selected file is displayed in the Browse field
•
To start the update process, click
Update
•
A progress indicator opens as the file is transferred to temporary storage on the AMM. A
confirmation window will be displayed when the file transfer is complete
•
Verify that the file shown on the
Confirm Firmware Update
window is the one you want
to update. If not, click
Cancel
•
To complete the update process, click
Continue
. A progress indicator opens as the
firmware on the AMM is flashed. A confirmation window will be displayed when the
update has successfully completed
•
The README file text might direct you to restart the AMM after completing the .PKT file
update. If so, click
Restart MM
on the navigation pane on the left side of the window
•
Click
OK
to confirm the reset. The Web browser window will then close. A new Web
browser window will have to be started and signed onto to continue
•
Repeat this process using the update file for the latest maintenance firmware release
