IBM Flex System FC3171, Installation And User Manual

Page: 45 / 64

© Copyright IBM Corp. 2012
35
Chapter 6. Parts listing
Replaceable components are of three types:
•
Tier 1 customer replaceable unit (CRU) : Replacement of Tier 1 CRUs is your
responsibility. If IBM installs a Tier 1 CRU at your request, you will be charged
for the installation.
• Tier 2 customer replaceable unit (CRU)
: You may install a Tier 2 CRU yourself
or request IBM to install it, at no additional charge, under the type of warranty
service that is designated for your server.
•
Field replaceable unit (FRU) : FRUs must be replaced only by a trained service
technician.
For information about the terms of the warranty, see the Warranty Information
document.
The replaceable components in Table 9 are Tier 1 CRUs. If other components require
replacement, see the documentation that came with those devices for instructions.
.
If other IBM Flex System components require replacement, see the following
documentation that comes with these devices:
•
IBM Flex System Problem Determination and Service Guide or Hardware Maintenance
Manual and Troubleshooting Guide
•
Installation and User’s Guide or Installation Guide
Note:
•
The latest versions of these documents are at
http://publib.boulder.ibm.com/infocenter/flexsys/information/index.jsp.
•
Cable requirements for the switch are described in the IBM Configuration and
Options Guide at http://www.ibm.com/servers/eserver/xseries/cog/. See the
documentation that comes with the compute node for cable-routing information.
Table 9. Replaceable components and corresponding CRU/FRU identifiers
Name of component CRU/FRU identifier
IBM Flex System FC3171 8 Gb SAN Switch
• 69Y1930 (Option)
• 69Y1933 (FRU)
IBM Flex System FC3171 8 Gb Pass-thru
• 69Y1934 (Option)
• 69Y1937 (FRU)
Switch filler (Tier 1 CRU)