IBM ESS 3000 Page 100 Hardware Planning And Installation Manual Download

Page: 100 / 108

non-quorum node

A node in a cluster that is not counted for the purposes of quorum determination.

O
OFED

See OpenFabrics Enterprise Distribution (OFED).

OpenFabrics Enterprise Distribution (OFED)

An open-source software stack includes software drivers, core kernel code, middleware, and user-

level interfaces.

P
pdisk

A physical disk.

PortFast

A Cisco network function that can be configured to resolve any problems that could be caused by the

amount of time STP takes to transition ports to the Forwarding state.

R
RAID

See redundant array of independent disks (RAID).

RDMA

See remote direct memory access (RDMA).

redundant array of independent disks (RAID)

A collection of two or more disk physical drives that present to the host an image of one or more

logical disk drives. In the event of a single physical device failure, the data can be read or regenerated

from the other disk drives in the array due to data redundancy.

recovery

The process of restoring access to file system data when a failure has occurred. Recovery can involve

reconstructing data or providing alternative routing through a different server.

recovery group (RG)

A collection of disks that is set up by IBM Spectrum Scale RAID, in which each disk is connected

physically to two servers: a primary server and a backup server.

remote direct memory access (RDMA)

A direct memory access from the memory of one computer into that of another without involving

either one's operating system. This permits high-throughput, low-latency networking, which is

especially useful in massively-parallel computer clusters.

RGD

See recovery group data (RGD).

remote key management server (RKM server)

A server that is used to store master encryption keys.

See recovery group (RG).

recovery group data (RGD)

Data that is associated with a recovery group.

RKM server

See remote key management server (RKM server).

S
SAS

See Serial Attached SCSI (SAS).

88 IBM Elastic Storage System 3000: Hardware Planning and Installation Guide

Summary of Contents for ESS 3000













































































































Search results

Summary of Contents for ESS 3000

Reviews:

Related manuals for ESS 3000

Brands by name

Popular brands

IBM ESS 3000, Hardware Planning And Installation Manual

Search results

Summary of Contents for ESS 3000

Reviews:

Related manuals for ESS 3000

Brands by name

Popular brands