background image

 

 50

xSeries 440:Troubleshooting Guide

 

Getting help and information from the World Wide Web

On the World Wide Web, the IBM Web site has up-to-date information about IBM 
xSeries and IntelliStation products, services, and support. The address for IBM 
xSeries information is http://www.ibm.com/eserver/xseries/. The address for IBM Intel-
liStation information is http://www.ibm.com/pc/intellistation/.

You can find service information for your IBM products, including supported options, at 
http://www.ibm.com/pc/support/. If you click Profile from the support page, you can 
create a customized support page. The support page has many sources of informa-
tion and ways for you to solve problems, including: 

Diagnosing problems, using the IBM Online Assistant

Downloading the latest device drivers and updates for your products

Viewing Frequently Asked Questions (FAQ)

Viewing hints and tips to help you solve problems

Participating in IBM discussion forums

Setting up e-mail notification of technical updates about your products

Software service and support

Through IBM Support Line, you can get telephone assistance, for a fee, with usage, 
configuration, and software problems with xSeries servers, IntelliStation workstations, 
and appliances. For information about which products are supported by Support Line 
in your country or region, go to http://www.ibm.com/services/sl/products/.

For more information about Support Line and other IBM services, go to 
http://www.ibm.com/services/, or go to http://www.ibm.com/planetwide/ for support 
telephone numbers.

Hardware service and support

You can receive hardware service through IBM Integrated Technology Services or 
through your IBM reseller, if your reseller is authorized by IBM to provide warranty ser-
vice. Go to http://www.ibm.com/planetwide/ for support telephone numbers.

In the U.S. and Canada, hardware service and support is available 24 hours a day, 7 
days a week. In the U.K., these services are available Monday through Friday, from 9 
a.m. to 6 p.m.

Summary of Contents for eserver xSeries 440











































































Reviews: