IBM eServer xSeries 205 Type 8480, Hardware Maintenance Manual And Troubleshooting Manual

Page: 106 / 168

Note: See “System” on page 110 to determine which components should be replaced by a field service technician.
Error code/symptom FRU/action
151 (Real time clock error)
1. Run diagnostics.
2. Battery.
3. System board.
161 (Real time clock battery error)
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
162 (Device configuration error)
Note: Be sure to load the default settings
and any additional desired settings; then,
save the configuration .
1. Run the Configuration/Setup Utility program.
2. Battery.
3. Failing device.
4. System board.
163 (Real-time clock error)
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
164 (Memory configuration changed.)
1. Run the Configuration/Setup Utility program.
2. DIMM.
3. System board.
184 (Power-on password damaged)
1. Run the Configuration/Setup Utility program.
2. System board.
185 (Drive startup sequence information
corrupted)
1. Run the Configuration/Setup Utility program.
2. System board.
187 (VPD serial number not set.)
1. Set serial number in the Configuration/Setup Utility program.
2. System board.
188 (Bad EEPROM CRC #2)
1. Run the Configuration/Setup Utility program.
2. System board.
189 (An attempt made to enter the system
with invalid passwords)
1. Run the Configuration/Setup Utility program.
201 (Memory test error.)
1. DIMM
2. System board
289 (DIMM disabled by the user or
system.)
1. Run the Configuration/Setup Utility program.
2. DIMM.
3. System board.
301 (Keyboard or keyboard controller
error)
1. Keyboard
2. System board
303 (Keyboard controller error)
v
System board
602 (Invalid diskette boot record)
1. Diskette
2. Diskette drive
3. Drive cable.
4. System board
96
IBM xSeries 205 Type 8480: Hardware Maintenance Manual and Troubleshooting Guide