IBM Eserver pSeries 670, User Manual

Page: 100 / 198

To run these tasks directly from the command line, specify the resource and other
task-unique flags. Use the descriptions in this chapter to understand which flags are
needed for a given task.
Tasks
The following tasks are described in this chapter:
v
Add Resource to Resource List
v
AIX Shell Prompt
v
Analyze Adapter Internal Log
v
Backup and Restore Media
v
Certify Media
v
Change Hardware Vital Product Data
v
Configure Dials and LPF Keys
v
Configure Reboot Policy
v
Configure Remote Maintenance Policy
v
Configure Ring Indicate Power On Policy
v
Configure Surveillance Policy
v
Create Customized Configuration Diskette
v
Delete Resource from Resource List
v
Disk Maintenance
v
Display Configuration and Resource List
v
Display Firmware Device Node Information
v
Display Hardware Error Report
v
Display Hardware Vital Product Data
v
Display Machine Check Error Log
v
Display Microcode Level
v
Display or Change Bootlist
v
Display or Change Diagnostic Run-Time Options
v
Display Previous Diagnostic Results
v
Display Resource Attributes
v
Display Service Hints
v
Display Software Product Data
v
Display System Environmental Sensors
v
Display Test Patterns
v
Download Microcode
v
Fibre Channel RAID Service Aids
v
Flash SK-NET FDDI Firmware
v
Format Media
v
Generic Microcode Download
v
Hot Plug Task
84 Eserver
pSeries 670 User’s Guide