IBM Eserver pSeries 670, User Manual

Page: 113 / 198

v
Critical Low – The sensor reading indicates a serious problem with the device. Run
diagnostics on sysplanar0 to determine what repair action is needed.
v
Warning High – The sensor reading indicates a problem with the device. This could
become a critical problem if action is not taken. Run diagnostics on sysplanar0 to
determine what repair action is needed.
v
Warning Low – The sensor reading indicates a problem with the device. This could
become a critical problem if action is not taken. Run diagnostics on sysplanar0 to
determine what repair action is needed.
v
Hardware Error - The sensor could not be read because of a hardware error. Run
diagnostics on sysplanar0 in problem-determination mode to determine what repair
action is needed.
v
Hardware Busy – The system has repeatedly returned a busy indication, and a
reading is not available. Try the service aid again. If the problem continues, run
diagnostics on sysplanar0 in problem-determination mode to determine what repair
action is needed.
This service aid can also be run as a command. You can use the command to list the
sensors and their values in a text format, list the sensors and their values in numerical
format, or a specific sensor can be queried to return either the sensor status or sensor
value.
Run the command by entering one of the following:
/usr/lpp/diagnostics/bin/uesensor -l
OR
-a /usr/lpp/diagnostics/bin/uesensor -t
token
-i
index
[-v]
Flag Description
-l List the sensors and their values in a text format.
-a List the sensors and their values in a numerical format. For each sensor, the
following numerical values are displayed as:
token index status measured
value location code
-t token
Specifies the sensor token to query.
-i index
Specifies the sensor index to query.
-v Indicates to return the sensor measured value. The sensor status is returned
by default.
Chapter 6. Introducing Tasks and Service Aids
97