IBM DS8700, Introduction And Planning Manual

Page: 232 / 256

Table 74. Inbound (remote services) work sheet (continued)
Item or Setting Instructions MC1 MC2 (if applicable)
Remote service
mode Check the mode that
indicates when to
allow unattended
sessions. Select
Continuous to enable
inbound remote
service at any time.
Select
Automatic
to
allow inbound calls for
a specified number of
days following a
failure on the storage
complex.
[ ] Continuous
[ ] Automatic
[ ] Temporary
[ ] Continuous
[ ] Automatic
[ ] Temporary
Number of days
for Automatic
mode If you selected the
Automatic mode,
specify the number of
days to allow an
unattended service
session after any
failure on the storage
complex.
Interval for
Temporary Mode If you selected the
Temporary mode,
specify the Starting
and Ending date of the
time period when
unattended service
sessions are allowed.
Note: This option
allows control of when
IBM can perform
unattended service.
The interval is
changed right before a
service action takes
place.
210
Introduction and Planning Guide