IBM DS8700 Introduction And Planning Manual Download Page 52

Page: 52 / 256

Disk drives

The DS8700 and the DS8800 provides you with the following choice of disk drives.

DS8700

The following drives are available in a 3.5" form factor.

Fibre Channel:

300 GB, 15K RPM

450 GB, 15K RPM

600 GB, 15K RPM

Serial Advanced Technology Attachment (SATA):

2 TB, 7.2K RPM

Fibre Channel drive types with Full Disk Encryption:

300 GB, 15K RPM

450 GB, 10K RPM

Fibre Channel Solid State Drives (SSDs):

600 GB

DS8800

The following drives are available in a 2.5" form factor.

Serial-attached SCSI (SAS):

146 GB, 15K RPM

300 GB, 15K RPM

450 GB, 10K RPM

600 GB, 10K RPM

900 GB, 10K RPM

SAS drive types with Full Disk Encryption (FDE):

146 GB, 15K RPM

300 GB, 15K RPM

450 GB, 10K RPM

600 GB, 10K RPM

900 GB, 10K RPM

2.5" SSD:

300 GB (nonencryption)

400 GB (FDE and nonencryption)

The following is available in a 3.5" form factor.
SAS drive set:

3 TB 7.2K RPM (includes nonencryption,FDE and FDE Standby CoD)

Host attachment overview

The DS8000 series provides various host attachments so that you can consolidate
storage capacity and workloads for open-systems hosts and System z.

The DS8000 series provides extensive connectivity using Fibre Channel adapters
across a broad range of server environments.

Introduction and Planning Guide

Summary of Contents for DS8700

































































































































































































































































Search results

Summary of Contents for DS8700

Reviews:

Related manuals for DS8700

Brands by name

Popular brands

IBM DS8700, Introduction And Planning Manual

Search results

Summary of Contents for DS8700

Reviews:

Related manuals for DS8700

Brands by name

Popular brands