IBM Dock II, User Manual

Page: 26 / 170

Changing Modes
When you are operating a computer docked to the Dock II, you
cannot put the computer in hibernation mode. You will hear a
warning beep from the computer if you attempt this. However, you
can enter suspend and standby modes. The following table
summarizes these conditions.
Attempt to Enter Can the Computer Enter the
Mode? Is a Password Needed to
Return to Operating Mode?
Suspend Mode Yes Power-on password is
needed if you have set one.
Standby Mode Yes None
Hibernation Mode No None
Warning Function
A combination of the warning indicator and the beep is used to alert
users about operating conditions. The combination is different
depending on the type and mode of the computer docked or
undocked. The following table summarizes the warnings.
Warning Cause How to Stop Warning
Beep sounds continuously
and the warning indicator
blinks. A computer of the 750
series was docked during its
HOT/WARM status. Undock or shut down the
computer.
Intermittent beep repeats
and the warning indicator
turns on. The eject switch was
pressed while a computer of
the 750 series was in the
HOT/WARM status. Wait for timeout.
10
IBM ThinkPad Dock II User's Guide
Title: C78JAMST CreationDate: 05/06/94 19:15:58